Connect to the Upper Computer via SSH
- This documentation is only applicable to FLY upper computers. Other devices are for reference only.
- If firmware compilation and flashing are required, please prioritize the network connection tutorial over the serial connection tutorial.
- You can connect to the device via serial port or Wi-Fi.
- Please prepare MobaXterm_Personal or other SSH terminal tools in advance.
- Ensure that the SD card or M2WE has been flashed with the corresponding upper computer system.
- If the upper computer fails to start properly, first disconnect peripherals such as drivers, limit switches, and fans.
- For subsequent firmware compilation, it is recommended to connect via SSH over the network.
Power Supply
- Use a
USB Type-Ccable to connect the FLY upper computer to your computer. - Ensure the
USB Type-Ccable supports data transmission. - After system startup, the device indicator will typically flash rapidly.
- FLY-C8
- FLY-Pi v2
- FLY-Pi
- FLY-Gemini
- FLY-MiniPad
- FLY-Pi Lite2
- Connect via Web
- Serial Connection
- Network Connection
Connect to the host SSH via web serial
-
After connecting the host to the computer via USB, click
Device Connectionbelow -
If everything is normal,
USB Serialor other similar devices will be displayed -
Select the corresponding device, then click
Connect -
After a successful connection, a prompt will appear
-
FlyOS-FAST default username root, default password mellow
-
Starting from version
V1.3.2, the FAST system automatically logs in when using a serial connection by double-clicking or pressing Enter twice consecutively -
After pressing Enter, the content shown in the figure below will appear
Loading...
- If the interface below appears, it means the login was successful
- The FAST system updated the style below after version V1.3.0
Connect to the host SSH using serial
- If the host is properly connected to the computer, open Device Manager and you will see the
CH340port
- Open
MobaXtermand configure as follows. For the port, select the port you saw earlier in Device Manager
- Please note that
Speed(bps)*needs to be set to115200
- If everything is normal, you will see the startup screen
- Wait a moment, and when this screen appears, it has started
If after waiting a few minutes, the interface shows nothing as in the figure below, just press Enter a few times
-
FlyOS-FAST default username root, default password mellow
-
Starting from version
V1.3.2, the FAST system automatically logs in when using a serial connection by double-clicking or pressing Enter twice consecutively -
After pressing Enter, the content shown in the figure below will appear
Loading...
- If the interface below appears, it means the login was successful
- The FAST system updated the style below after version V1.3.0
- If you need to view the device
IP, make sure a network cable or Wi-Fi is connected Connect WIFI
Connect to the host SSH using a network IP
- Please log in to the router admin panel that the host is connected to, unless you know the host IP address
- Please make sure you know the host username and password
- FlyOS-FAST default username root, default password mellow
- If the motherboard has already started and is connected to the network, you can use the following method to connect to SSH
- Open MobaXterm and configure as follows. For IP, enter the one you checked earlier, or you can also check it in the router admin panel
Note: In step 4 here, enter the host username
- This window will pop up on the first connection, just click
Accept
- You will be prompted to enter the password. Enter the host password and press Enter
Note: The password entered here is invisible, just press Enter after entering it
- For the FLY-FAST system, the username is:
root, and the password is:mellow
- If the interface below appears, it means the login was successful
- The FAST system updated the style below after version V1.3.0
- Login successful