Skip to main content

Usage Guide

Notes​

  • Internet connection is required for first-time use. If your WIFI cannot connect to the internet, halo will not be able to obtain the first boot configuration.
  • All settings on the settings page will only take effect after clicking Save Settings and the device restarts.
  • The filament jam detection function is disabled by default. After enabling filament jam detection in settings and restarting, you can enter it by swiping up from the home page.
  • The shut down after printing function is disabled by default and can be enabled in settings.
  • Buttons in all pop-up windows that require canceling printing or pausing printing must be long-pressed; single-click is invalid (to prevent accidental touches).
  • In the system services page, the Host service is the upper computer host.
  • When using official firmware, please do not attempt to replace the main control chip or FLASH chip.
Tip
  • Note: If your moonraker.conf configuration file size exceeds 4MB, you may not be able to use it properly. If abnormalities occur, please reduce the size of the moonraker.conf configuration file.

System Firmware Update​

  • Halo version updates come in two types: full updates and OTA incremental updates.
    • Full update: Involves major underlying upgrades, requiring USB flashing of the full firmware package.
    • Incremental update: Standard OTA upgrade, available via checking for updates on the device information page.

Language Selection​

Loading...

Use your phone to scan the code and configure WiFi​

Tip
  • Some mobile devices may not have the WiFi connection feature via code scanning. You can connect to the hotspot named FLY-halo-xxxxxxxx in your phone's WiFi settings.
Tip
  • If no web page pops up after connecting to the hotspot, you need to manually open the link in your browser.
Tip
  • Please note that HALO can only use 2.4G WiFi.
Tip
  • The Halo screen cannot search for hidden WiFi networks.

If the phone does not redirect after connecting to WiFi, you can access the following URL to enter the console​

http://192.168.4.1/

Loading...

Select the WiFi you need to connect to​

  • Select the WiFi you need to connect to
    Loading...

Enter the IP to connect to Klipper​

  • Enter the Klipper IP in the Moonraker IP field
    Loading...

Save and exit​

  • Halo will automatically restart and connect to Klipper, and the hotspot built into Halo will automatically turn off
    Loading...
Loading...