FLY-USB-LCD7 Introduction
FLY-USB-LCD7 is a 7-inch USB touchscreen based on the ArtInChip D133 (RISC-V) chip. It can be used as a USB display and audio device once connected to a computer via a USB cable.
Loading... | Loading... |
Before purchasing, we recommend downloading and attempting to install the driver for your host system and CPU architecture. If the driver cannot be installed or errors occur during installation, it may indicate that your current system, hardware architecture, or security policy is incompatible. Please check the Driver Compatibility Notes and confirm compatibility before purchasing.
Please use a reliable USB Type-C data cable (supporting data transfer). Poor-quality or charge-only cables may cause screen flickering, device recognition failure, or insufficient power supply.
Key Features
- 7-inch IPS screen, resolution 1024×600
- Capacitive touch (GT911), with touch feedback buzzer
- USB video input (host pushes frames via MJPEG protocol)
- USB audio output
- Dual USB disk modes (FLY BOOT / FLY DATA) for firmware upgrade and custom resources
- Long-press the bottom-left and bottom-right corners of the screen simultaneously to open the settings interface, where you can adjust backlight, volume, rotation, screensaver, etc.
- Automatically turns off the backlight after 30 seconds of no video signal; touch to wake
Screen Specifications
| Item | Specification |
|---|---|
| LCD Size | 7.0 inch |
| Resolution | 1024(RGB)×600 |
| Pixel Pitch | 0.0502(H) × RGB × 0.1432(V) mm |
| Active Display Area | 154.21(H) × 85.92(V) mm |
| Module Size | 164.9(H) × 100.00(V) × 3.5(T) mm |
| Surface Treatment | AG |
Product Overview
- Communication: USB
- Onboard Interfaces: TYPE-C, USB-A ×1, MX1.25-4P ×2, MX1.25-2P (speaker) ×1
- Operating Temperature: 0°-60°C
- Touch Type: Capacitive
Expansion Interfaces
- USB-A ×1: Standard USB-A port for connecting USB devices
- MX1.25-4P ×2: Universal pinout for connecting USB devices
- MX1.25-2P ×1: Speaker interface, supports up to 4Ω 2.6W / 8Ω 1.6W small speakers (speaker not included)
The MX1.25-2P speaker interface has low output power and only supports 4Ω 2.6W or 8Ω 1.6W small speakers. Do not connect high-power speakers.
Package Contents
- FLY-USB-LCD7 screen ×1
- Please use a reliable USB-C data cable; poor-quality cables may cause screen flickering or device recognition failure
- The screen is powered via USB. Please ensure the host USB port outputs ≥ 5V 1A