Skip to main content
tip
  • SHT36 V2 provides Katapult firmware for USB and CAN connections. You can flash it yourself if needed.
  • Katapult Firmware Flashing
  • SHT36 V2 comes pre-flashed with Katapult firmware for CAN connection at a rate of 1M.
Important Notes

Firmware Flashing Instructions

  • Both firmware compilation and flashing require the use of a host computer.
  • SHT36 V2 can connect to the host computer via CAN.
  • CAN connection requires the use of an XT30(2+2)-F cable.
  • Below is the style of the XT30(2+2)-F data cable.
    Loading...
Important
  • Mainboard firmware flashing requires flashing Klipper via Katapult.
  • If you are sure the mainboard already has Katapult flashed, you do not need to perform the final step of flashing the Katapult firmware.

CAN Firmware Compilation​

  • SHT36 V2 can only connect to the host computer via CAN.
  • For STM 103, please see 103 CAN Firmware Flashing
  • For APM 072 and STM 072, please see 072 CAN Firmware Flashing

Katapult Firmware Explanation​

tip

Katapult was originally named CanBoot and later renamed to Katapult.

  • Katapult firmware is a type of bootloader that can be used in conjunction with Klipper. After flashing via methods like DFU, the firmware can be updated with a single command.
  • Advantages: Quickly double-click the reset button or power off twice in quick succession to enter Katapult firmware, at which point an LED on the motherboard will blink.
  • Katapult firmware can only be used to flash firmware and cannot connect to Klipper!!!
  • Katapult firmware supports three methods for connecting to the host computer, with each method's firmware being independent of the others:
    • CAN connection
      • Advantages: After compiling the Klipper firmware, it can be updated directly using commands, with strong anti-interference capability.
      • Disadvantages: Requires prior knowledge of the firmware's compiled baud rate.
    • RS232 connection
      • Advantages: After compiling the Klipper firmware, it can be updated using commands, with very strong anti-interference capability.
      • Disadvantages: Cannot update the firmware with a single command; requires manually entering Katapult firmware.
    • USB connection
      • Advantages: After compiling the Klipper firmware, it can be updated directly using commands.
      • Disadvantages: Long data cables are prone to interference, which may cause disconnections.
Loading...