Firmware Flashing and Onboard DIP Switch Instructions
How to Determine Which Firmware You Need
USB Firmware Flashing
Check the DIP Switch
USB Bridge CAN Firmware Flashing
SSH into the Host Computer
Read and View Mainboard ID
- This tutorial is only applicable to the Mainboard ID reading and viewing methods.
Connect the Toolboard and Search for ID
This tutorial specifically covers the wiring and ID search for the Toolboard. The related steps are not applicable to the Mainboard*. Please distinguish between them.
BL Firmware, Do Not Use!
* Please note that the bootloader is pre-flashed at the factory, so no additional flashing is required.