Skip to main content

Usage Instructions

Connection Methods​

Important Notes
  • Only the two methods below can be used for connection, and you must choose one—there are no other connection methods!!!

Method One: Connect the USB A (male) port of the U-IP to the USB A (female) port of the host machine.

Method Two: Use a data cable (USB to TYPE-C) to connect one end to the USB A (female) port of the host machine and the other end to the U-IP.

Loading...

Then: After connecting the cable, wait normally.

Configuring the U-IP Method

Important Notes
  • Currently not supported for Apple users.
  • Requires a WINDOWS system to function.
  • Only the two methods below can be used for connection, and you must choose one—there are no other connection methods!!!

Method One: Connect the USB A (male) port of the U-IP to the USB A (female) port of the computer.

Method Two: Use a data cable (USB to TYPE-C) to connect one end to the USB A (female) port of the computer and the other end to the U-IP.

Loading...

Then: Wait for five seconds, then use a browser on WINDOWS and enter http://192.168.4.1/ in the address bar. Press Enter to bring up the interface shown below.

Loading...

Interface Introduction​

Network Settings​

  • Allows setting the U-IP's IP address, MAC address, hostname, and backend management port.
  • Please do not modify these settings arbitrarily.
    Loading...

Display Settings​

  • Allows setting the display orientation, backlight brightness, and whether to show the IPv6 address of the connected machine, among other options.
    Loading...

System Control​

  • Allows viewing the firmware version and provides options to restart the device or enter the U-IP's flashing mode.
    Loading...

System Connection Configuration​

Moonraker Configuration​

  • The first one is whether to enable the Moonraker connection, which is enabled by default.
  • The second one is the IP address automatically assigned to the machine.
  • The third one is the port number of Moonraker, which is 7125 by default.
    Loading...

SSH Configuration​

  • For special systems, you can try this method, but please note that not all machines can use this function properly.
  • After enabling the SSH connection, enter the machine's SSH account and password. The port number is 22 by default.
  • This option will log in to the machine via SSH and obtain the machine IP and system resources. If it cannot be obtained, it will keep looping on the startup screen.
    Loading...
Loading...