Skip to main content

Fly-SHT36-V3 Tool Board Documentation

Quick Navigation​

1. Preparation​

Hardware Checklist:

  • Tool Board: Fly-SHT36-V3
  • Host Computer:
    Host Computer Compatibility Notice
    • Recommended Models: Fly-PI-V3, Raspberry Pi 4/5, and other standard host computers
    • Unsupported Models: Redmi phones, WiFi dongles, and set-top boxes, and various modified non-standard host computers
    • Important Note: Using modified host computers may cause system instability, functional abnormalities, or inability to use normally
  • Data Cable: One Type-C data cable
  • Connection Method (Choose One):
    • CAN Connection: Requires a UTOC module or a motherboard flashed with USB-to-CAN bridge firmware
    • RS232 Connection: Requires a UTOR module or a motherboard with native RS232 support (such as D8, D8-Pro, C8P)
  • Power Supply: 12V-24V power adapter (please ensure the voltage is within range)
  • Computer: Windows computer (or other computer that can use SSH tools)

2. Usage Guide and Precautions​

Core Principle: Most problems are caused by inconsistencies in configuration, connection, or power supply. Please troubleshoot in the following order of priority:

  1. Connection and Configuration: Ensure that the DIP switch, firmware type, and the [mcu SHT36] connection method in Klipper are all consistent (all CAN or all RS232).
  2. Power and Wiring: Confirm that the power supply voltage is normal. All cables are securely connected.
  3. Status Indicators: After powering on, check whether the power and status indicator lights are normal.

Related Documents:

Step Overview:

  1. Set the DIP switch (select CAN or RS232 mode)
  2. Flash the corresponding firmware
  3. Obtain the device ID (CAN UUID or RS232ID)
  4. Configure the connection in Klipper

Related Documents:

4. Hardware Connection and Klipper Configuration​

Contents:

  • Description of each interface function on the tool board
  • Wiring methods for motors, heaters, sensors, etc.
  • Klipper reference configuration file

Related Documents:

5. Advanced Features (Optional)​

Optional Features:

  • Accelerometer: Used for input shaping resonance suppression
  • 31865: High-precision temperature sensor (PT100/PT1000) configuration
  • EDDY: Eddy current sensor. Used for nozzle contact detection

Related Documents:

6. Technical Resources​

Contents:

  • Schematic download
  • 3D model files Related Documents:

Usage Recommendations​

New users:​

  1. Start from Preparation
  2. Carefully read Important Notes
  3. Complete the steps in order: Firmware Flashing → Hardware Connection → Basic Test
  4. If issues arise, refer to Troubleshooting

Experienced users:​

  1. Directly jump to the specific documentation for your needs
  2. Refer to Technical Documentation for detailed parameters
  3. Configure Advanced Features for improved performance
Loading...