Firmware Flashing Instructions
* ERCF V2 comes pre-flashed with Katapult firmware for CAN connection at a rate of 1M
Firmware Compilation and Flashing
Please first select the actual firmware type to be flashed. The corresponding compilation and flashing steps will only be displayed after selection.
Bootloader Recovery (Unbricking)
The FLY-ERCF V2 is pre-flashed with Katapult at the factory. Do not re-flash the firmware on this page during normal use or when updating Klipper firmware; this page is only for unbricking recovery after the Bootloader is damaged.