📄️ Firmware Flashing and Onboard DIP Switch Instructions
How to Determine Which Firmware You Need
📄️ USB Firmware Flashing
SSH Connection to the Host
📄️ USB Bridge CAN Firmware Flashing
SSH into the Host
📄️ Connect Tool Board and Search for ID
This tutorial specifically covers the wiring and ID search for the Tool Board*. The related steps are not applicable to the Main Board; please distinguish them carefully.
📄️ BL Firmware, Do Not Use!
* Please note that the bootloader is pre-flashed at the factory and does not need to be re-flashed.