Introduction
FLY SHT36 V3 is a toolhead board designed by Guangzhou Meilun Electronic Technology Co., Ltd. for 3D printer extruder heads. With this toolhead board, four wires can be used to replace the complicated wiring between the original mainboard and the printhead, optimizing the layout. SHT36 V3 is suitable for 36 stepper motors, and it integrates a CAN transceiver, RS232 transceiver, Type-C port, TMC2209 driver, LIS2DW accelerometer, 2 controllable fans, and other functions into a toolhead board. This toolhead board is suitable for Klipper firmware, and Max V3 supports RRF firmware.
Documentation Index
Quick Navigation
Firmware Flashing and ID Search
5 items
Usage Guide and Precautions
4 items
Pinout
- This page lists the pinout of the FLY-SHT36 V3 tool board after flashing Klipper firmware. The pin numbers are based on the product schematic.
配置参考
请不要在打开网页翻译时修改配置
Tool Board Pinout and Wiring Diagram
Due to the high resolution of the image, it may be difficult to see clearly when browsing on a webpage. Please move your mouse cursor over the wiring diagram, right-click, and select "Save image as..." to save the image to your desktop for better viewing!!!
Accelerometer Usage
Usage Tutorial
Onboard MAX31865 Usage Instructions
The standard thermistor interface of the SHT36-V3 supports NTC(100K) thermistors by default, and can also be switched to use PT1000* via jumpers.
EDDY Usage
- Before use, ensure your printer has no electrical leakage.
3D Model and Schematic Diagram
* This document provides the following materials